One week later and the body is in primer at Gary's Auto Body They addressed some issues with a few voids in the gel coat and some waviness on top of the cowl. Also some rough edges along the lower body where we had trimmed to mount the rocker mouldings and below the tailgate. They took notice that you could see light at the seam between the bottom of the firewall and the floor. So that will be filled with seam sealer and also around the inside of the door openings before paint. Next on the schedule is to Line-X the firewall and under the floor. Not much else to report at this time other than the fine job so far. Will keep updating as things progress.